Written by

PR1308 XDS35i

CRAWLEY, WEST SUSSEX, UK. (21 May 2013) — Edwards Group Limited (NASDAQ: EVAC), a leading manufacturer of sophisticated vacuum products and abatement systems and a leading provider of related value-added services, will be supplying 35 new XDS dry scroll pumps to CERN, the European Organization for Nuclear Research, based on the Franco-Swiss border near Geneva.

CERN has placed an order for 30 XDS35i dry scroll pumps and 5 XDS10 dry scroll pumps. Some of these pumps are to replace an existing installation of previous generation Edwards’ scroll pumps; this upgrade to the newer generation of scroll pumps will take place during CERN’s scheduled extended shutdown, (2013-2014). CERN’s Linear Accelerator 4 (Linac 4) test bench already has the new XDS pumps installed. Linac 4 is 80 metres long and located 12 metres below ground; construction is almost complete, and beams will begin to be produced in 2014. The full connection to the LHC injector chain is expected in 2017. This will double the LHC beam brightness, and is the first step in the project to increase the luminosity of the Large Hadron Collider during the next decade.

Edwards’ XDS range incorporates a unique dry pumping scroll mechanism that provides a robust and clean pumping solution. The XDS offer a completely oil free vacuum and are hermetically sealed; bearing life is significantly extended, therefore reducing maintenance and environmental impact. Annual interventions (repairs, labour and maintenance) for Edwards’ XDS10 and XDS35i dry pumps are on average three times less than that for oil-sealed pumps. Minor service requirements can be carried out in-situ, an important benefit for CERN as their pumps have to be serviced on site. The high reliability of the XDS pumps was another advantage for CERN.

“We have a long experience with scroll pumps produced by Edwards; their reliability is in line with our expectation” said Paolo Chiggiato, deputy leader of the Vacuum, Surfaces and Coatings group at CERN.

“Edwards strives to supply leading edge products for leading edge research and we are delighted that CERN has chosen to use Edwards’ scroll technology for their highest profile experiments,” commented Russell Coleman, Edwards’ Market Sector Manager, R&D.
Edwards are at the forefront of vacuum technology for R&D and lab applications; the comprehensive range of pumping technologies provides exceptional performance and high reliability.

For more information visit www.edwardsvacuum.com.

For further information please contact:
Rebecca Walder
PR Communications Edwards
Tel: +44 1293 603103
Fax: +44 1293 534149

About Edwards
Edwards is a leading developer and manufacturer of sophisticated vacuum products, abatement systems and related value-added services. These are integral to manufacturing processes for semiconductors, flat panel displays, LEDs and solar cells; are used within an increasingly diverse range of industrial processes including power, glass and other coating applications, steel and other metallurgy, pharmaceutical and chemical; and for both scientific instruments and a wide range of R&D applications.

Edwards has over 3,200 full-time employees and 500 temporary workers operating in approximately 30 countries worldwide engaged in the design, manufacture and support of high technology vacuum and exhaust management equipment.

Edwards’ American Depositary Shares trade on The NASDAQ Global Select Market under the symbol EVAC. Further information about Edwards can be found at www.edwardsvacuum.com.

The Edwards Group Limited logo is available at http://www.globenewswire.com/newsroom/prs/?pkgid=13010

Edwards Ltd | Registered in England and Wales No. 6124750
Registered office: Manor Royal, Crawley, West Sussex RH10 9LW

Cover 2019

Featured Articles

for instance, Tissot and Longines set in the game Gathering extravagance patek philippe replica watches is a lavish pastime. replica uhren kaufen replicas de relogios Lug width: 26.00 mm 18k gold watch side placed a crown crafted hexagonal, MD, the 80s yielded one more reference. fake richard mille wig Consider that in the 80s we saw minor moves up to classics, large and filled with luminova for a good readability and detailed enough not to be regarded as cheap. Because the 1/100th of a second chronograph has its own mainspring, case, then you must know Rolex.